Important safety instructions for the laundry ozone generator

Nowadays, health is a constant concern. In addition to eating healthily, dressing healthily has become the focus of attention. This is why a variety of healthy washing machines have been created, and one of these is the ozone sterilization washing machine. Ozone sterilization washing machines use a laundry ozone generator to produce ozone, which is installed in the bottom of the washing machine, and the ozone produced is introduced into the washing water. As ozone is readily soluble in water, it turns the wash water into ozonated water, thus achieving a germicidal effect on the laundry. Basic safety precautions should always be followed when installing and using this electrical equipment.

Here is the content list:

• The first 6 important safety instructions for the laundry ozone generator.

• laundry ozone generator after 7 important safety instructions.

The first 6 important safety instructions for the laundry ozone generator.

Firstly, read and follow all instructions. Secondly, the laundry ozone generator is for indoor use only and is not suitable for outdoor use. Third, use non-metallic piping installed at least 5 feet above the bath water. The washing machine ozone generator should be installed at least 1 foot above the maximum water level to prevent water from contacting the electrical equipment. Install by installation instructions. Fourth, short-term inhalation of high concentrations of ozone and long-term inhalation of low concentrations of ozone can cause serious harmful physiological effects, so do not inhale the gas produced by this appliance. Fifth, the inside of the power terminal box or junction box has green terminals or terminals marked with "G", "GR", "ground", "earth ", or marked terminals. To reduce the risk of electric shock, this terminal must be connected to the earthing device provided in the supply service panel, which uses a continuous copper wire of a size comparable to the circuit conductor of the equipment to be supplied. Sixthly, at least two lugs marked as "solder lugs" are provided on the outer surface or inside the supply terminal box or compartment. To reduce the risk of electric shock, insulated or bare copper conductors, not less than 6 AWG in size, should be used to connect the local common network in the hot tub or spa area to these terminals.

laundry ozone generator after 7 important safety instructions.

Seventh, all metal parts installed on site, such as rails, ladders, drains or other similar hardware should be connected to the equipment earthing busbar with a copper conductor of not less than 6 AWG gauge within 3 meters of the spa or hot tub. Eighth, all electrical connections should be made by a licensed and qualified electrician. Ninth, ensure that all power to the main circuit breaker is turned off before attempting any electrical connections. Tenth, equipment, and controls should be located at a horizontal position not less than 1 meter from the spa or hot tub. Eleventh, the power supply to the laundry ozone generator must include a suitably rated switch or circuit breaker to open all ungrounded power conductors. The disconnecting device must be easily accessible but must be installed at least 5 feet from any open water. Twelfth, the system should be properly sized for its intended use by a qualified professional familiar with the application. The device must be verified by the manufacturer for its intended use; failure to do so may invalidate the warranty. Thirteenth, save these instructions.

If you are interested in the ozone laundry system, you can contact us at https://www.deposon.com/, we welcome you and look forward to working with you.