Not all boron-doped diamonds are blue diamonds. Blue diamonds have higher requirements regarding impurities, defects, and crystal orientation in addition to containing boron.
What are the differences between blue and black diamonds?
There is no such a category as “black diamonds”. Diamonds are the most transparent material. The so-called “black diamonds” are dark because of graphite inclusions, which are not considered as a kind of diamonds.
Is Bluamec® Water the same as trioxide water?
No, they are different. Bluamec® Water is a kind of oxidation-rich water which contains hydroxyl radicals (OHo), trioxygen (O3), oxygen atoms (Oo), hydrogen peroxide (H2O2), and many other substances.
Is Bluamec® Water harmful to the human body?
No. Many people may confuse Bluamec® Water with trioxide gas. Trioxide gas is mainly generated through a series of complex non-linear photochemical reactions involving nitrogen oxides (NOx) and volatile organic compounds (VOCs). High concentrations of trioxide gas can be detrimental to human health. Bluamec® Water is different from trioxide gas. The trioxide water in Bluamec® Water produced by our devices will disperse in the air. Only a very small amount of ozone gas will overflow, which will not pose any harm to humans.
Is the Bluamec® Water safe to use?
Bluamec® Water is a strong oxidizing agent containing hydroxyl radicals (OHo), trioxygen (O3), oxygen atoms (Oo), hydrogen peroxide (H2O2), and others. These oxidation groups are not corrosive or flammable and are completely safe to use in various scenarios. There is no need to wear gloves or other personal protective equipment as you would when handling hazardous chemical cleaning solutions.
How is Bluamec® Water produced?
With power on, Bluamec® products utilize the excellent properties of Bluamec®, such as its high hardness, strong heat conductivity, wide electrochemical window, to accelerate water molecular reconstruction without altering its chemical equilibrium. In this way, it lowers the energy threshold required to break down water molecules (H2O), and promotes the efficient and rapid generation of oxidation-rich groups, such as hydroxyl radicals (OHo), trioxygen (O3), oxygen atoms (Oo), and hydrogen peroxide (H2O2), which constitute Bluamec® Water.
How does Bluamec® Water disinfect and sterilize?
Bluamec® Water contains hydroxyl radicals (OHo), trioxygen (O3), oxygen atoms (Oo), hydrogen peroxide (H2O2), and other oxidation-rich groups, which are extremely unstable and decompose rapidly to form free radicals with high ORP or redox properties. During oxidation, only one oxygen atom reacts chemically with hydrogen to form hydroxyl radicals (OH). Bluamec® Water is harmless to humans and can quickly attack and eliminate contaminants it comes into contact with. The oxidation process disrupts the cell walls of bacteria and viruses in the same way that hydrogen peroxide and iodine do, causing microbial cells to evaporate and die. This oxidative action also removes electrons from molecules and ultimately renders them inert. In this way, Bluamec® Water kills bacteria that cause odor and viruses responsible for diseases, and breaks down the surface biofilms that feed microorganisms.
How long does the disinfection and sterilization effect of Bluamec® Water last?
The half-life of oxidation-rich groups in Bluamec® Water is about 15 minutes (depending on the temperature and water quality). These oxidation groups naturally abate, which means that they turn to water and oxygen after disinfection. As a result, there are no chemical residues, which makes Bluamec® Water a better disinfectant solution than chemical disinfectants.
What residues are left behind after disinfection with Bluamec® Water?
There are no chemical residues left behind. Bluamec® Water naturally reduces to water and oxygen after disinfection. This makes it safer than chemical disinfectants such as chlorine-based sanitizers, which always leave behind oxidation or disinfection by-products.
How does Bluamec® Water compare to mouthwashes?
Based on many dentists' experience, Bluamec® Water is milder than typical mouthwash used by patients with periodontal disease. Deposon's products have been third-party certified, and the test results show that they are non-irritating to human skin.
What are the benefits of using Bluamec® Water for mouth rinsing?
There are many anaerobes in the mouth that can cause bad breath. Bluamec® Water can effectively remove and destroy these bacteria and other pathogens in the oral cavity, thus not only promoting oral hygiene but also reducing oral odor.
What are the advantages of Bluamec® Water?
The mouth contains various types of bacteria such as anaerobes. Bluamec® Water can help maintain hygiene in the oral cavity and reduce oral odor.
Is Bluamec® Water harmful when it comes into contact with our skin and mouth?
Bluamec® Water has been certified by an authoritative third-party testing agency that it brings no irritation to the human skin and mouth.
Does Bluamec® Water affect the taste of food?
No. Bluamec® Water does not change the pH value of the source water. As long as the tap water is neutral, Bluamec® Water will naturally revert to oxygen and water after disinfection. Therefore, it does not leave residues or affect the taste of food like chlorine-based disinfectants do.
What can Bluamec® Water be used to clean?
Deposon's Bluamec® products are certified by an authoritative third-party testing agency that they neither cause skin irritation nor corrode stainless steel surfaces. Therefore, they are suitable for disinfecting kitchen utensils, kitchen knives, hands, and clothing. Moreover, Bluamec® Water can be used to eliminate odors, remove pathogens from meat, clean surfaces in various facilities (e.g., hospitals, clinics, schools, restaurants, and husbandry farms), and degrade pesticide residues on fruits and vegetables.
How effective is Bluamec® Water for disinfection?
Bluamec® products have been tested and confirmed by a third-party authority to achieve a 99.99% sterilization rate in 30 seconds.
Is Deposon's Bluamec® Water compliant with the applicable safety standards of waste gas?
Yes. Bluamec® Water is generated seamlessly from water, containing hydroxyl radicals (OHo), trioxygen (O3), oxygen atoms (Oo), hydrogen peroxide (H2O2), and other oxidation-rich groups. Among them, trioxide water is a gas dissolved in water and is thus safe to use in well-ventilated spaces.
Do Deposon's Bluamec® products require air quality testing?
No. Bluamec® products adopt patented electrolytic ozone generators. They use water as the input to produce Bluamec® Water containing hydroxyl radicals (OHo), trioxygen (O3), oxygen atoms (Oo), hydrogen peroxide (H2O2), and other oxidation-rich groups. This process does not require air quality monitoring.
About Deposon
Guangzhou Deposon Electric Co., Ltd. is a world-leading manufacturer of the fourth - generation "ultimate semiconductor material" – conductive diamonds. It is China's first national high - tech enterprise to bring these diamonds from the laboratory stage to large-scale commercialization.
