Views: 0 Author: Site Editor Publish Time: 2021-09-07 Origin: Site
At present, the existing ozone sprayer on the market is divided into two categories: knapsack ozone sprayer and hand-pushed ozone sprayer. The backpack-type ozone sprayer is bulky in size but flexible in operation. The hand-pushed type ozone sprayer has low labor intensity and can only be used in the corridor of the greenhouse due to its limited activity. The purpose of this study is to solve the limitation of the traditional ozone sprayer, so that it can be better popularized, reduce labor intensity, improve productivity, and increase farmers' income. The following is an introduction to ozone sprayers.
Here is the content list:
l Selection of materials for ozone sprayer
l The principle of ozone sprayer
l Mobile ozone sprayer
Ozone concentration is closely related to feedstock gas, electrode form, and dielectric material. Any gas in the discharge chamber must be dried, dusted, and dehumidified, otherwise, it will affect ozone production and the service life of the ozone sprayer. Dust, oil, and other impurities will be absorbed on the electrode, affecting the discharge efficiency. Therefore, this test uses the dryer through silica gel, filter screen, molecular sieve three layers of adsorption filtration, further improve the purity of the gas source. The traditional electrode form is wire - round tube electrode, cylinder - round tube electrode. The test results show that the two discharge modes are different. The former has a higher breakdown voltage, which is easy to cause the damage of discharge chamber parts, while the latter has a higher ozone production rate and concentration, so the cylindrical tube electrode is used. The dielectric material is an important part of the dielectric barrier discharge ozone sprayer generator, it can enhance the electric field intensity in the air gap, effectively avoid the gas gap was broken down, but also can make the electric field in the gas gap more uniform, increase the discharge area, to improve the ozone output, ozone rate, and ozone concentration.
The ozone sprayer uses high voltage discharge to shock the air to generate oxygen molecules and oxygen atoms, and the generated oxygen atoms combine with oxygen molecules to generate ozone molecules. Under the dual action of the gas-liquid mixing pump and miscibility chamber, the generated ozone molecules fuse with functional water to form high concentration ozone water. Then, through the high-pressure sprinkler will be a high concentration of ozone functional water sprayed on the crops, to achieve the purpose of sterilization, to replace the high pollution, high residue pesticide.
The purpose of this paper is to optimize the design of portable ozone sprayers for greenhouses, the power provided by the polymer lithium battery, it has a mobile and flexible, simple operation, safe and reliable, good quality, high production efficiency, and low investment cost is the most important of ozone sterilization effect is obvious and does not produce secondary pollution, can satisfy the spraying insecticidal, sterilization and other requirements.
If you want to know more about the ozone sprayer, you can visit our company's official website. Guangzhou Deposon Electric Co., Ltd. focused on the production of high-quality ozone sprayer and Ozone Sanitizing Spray Bottle, and constantly improve the performance and reliability of the product, to provide users with economic, practical, high-quality ozone sprayers.